三九宝宝网宝宝百科宝宝知识

金属材料词汇

11月05日 编辑 39baobao.com

[《新标准》英语教学中对词汇用法的延伸]终于,学生们给期末考试划上了句号,接下来便是老师的事了,阅卷,登分,质量分析。当然做这些事都要到明天,现在我能做的就是从试卷中得到一点启示。没有细看整份试卷,单看了单词拼写,...+阅读

X线结晶分析法 X – ray crystal analyics method

奥氏体 Austenite

奥氏体碳钢 Austenite Carbon Steel

奥氏铁孻回火 Austempering

半静钢 Semi-killed steel

包晶反应 Peritectic Reaction

包晶合金 Peritectic Alloy

包晶温度 Peritectic Temperature

薄卷片及薄片(0.3至2.9mm厚之片)机械性能 Mechanical Properties of Thin Stainless Steel(Thickness from 0.3mm to 2.9mm) – strip/sheet

杯突测试(厚度: 0.4公厘至1.6公厘,准确至0.1公厘 3个试片平均数) Erichsen test (Thickness: 0.4mm to 1.6mm, figure round up to 0.1mm)

贝氏体钢片 Bainite Steel Strip

比电阻 Specific resistivity & specific resistance

比较抗磁体、顺磁体及铁磁体 parison of Diamagism, Paramagic & Ferromagism

比热 Specific Heat

比重 Specific grity & specific density

边缘处理 Edge Finish

扁线、半圆线及异形线 Flat Wire, Half Round Wire, Shaped Wire and Precision Shaped Fine Wire

扁线公差 Flat Wire Tolerance

变态点 Transformation Point

表面保护胶纸 Surface protection film

表面处理 Surface finish

表面处理 Surface Treatment

不破坏检验 Non – destructive inspections

不锈钢 Stainless Steel

不锈钢 – 种类,工业标准,化学成份,特点及 主要用途 Stainless Steel – Type, Industrial Standard, Chemical position, Characteristic & end usage of the most monly used Stainless Steel

不锈钢薄片用途例 End Usage of Thinner Gauge

不锈钢扁线及半圆线常用材料 monly used materials for Stainless Flat Wire & Half Round Wire

不锈钢箔、卷片、片及板之厚度分类 Classification of Foil, Strip, Sheet & Plate by Thickness

不锈钢材及耐热钢材标准对照表 Stainless and Heat-Resisting Steels

不锈钢的磁性 Magic Property & Stainless Steel

不锈钢的定义 Definition of Stainless Steel

不锈钢基层金属 Stainless Steel as Base Metal

不锈钢片、板用途例 Examples of End Usages of Strip, Sheet & Plate

不锈钢片材常用代号 Designation of SUS Steel Special Use Stainless

不锈钢片机械性能(301, 304, 631, CSP) Mechanical Properties of Spring use Stainless Steel

不锈钢应力退火卷片常用规格名词图解 General Specification of Tension Annealed Stainless Steel Strips

不锈钢之分类,耐腐蚀性及耐热性 Classification, Corrosion Resistant & Heat Resistance of Stainless Steel

材料的加工性能 Drawing abillity

插入型固熔体 Interstital solid solution

常用尺寸 monly Used Size

常用的弹簧不锈钢线-编号,特性,表面处理及化学成份 StainlessSpring Wire – National Standard number, Charateristic, Surface finish & Chemical position

常用的镀锌钢片(电解片)的基层金属、用途、日工标准、美材标准及一般厚度 Base metal, application, JIS & ASTM standard, and Normal thickness of galvanized steel sheet

长度公差 Length Tolerance

超耐热钢 Special Heat Resistance Steel

超声波探伤法 Ultrasonic inspection

冲击测试 Impact Test

冲剪 Drawing & stamping

初释纯铁体 Pro-entectoid ferrite

处理及表面状况 Finish & Surface

纯铁体 Ferrite

磁场 Magic Field

磁畴 Magic domain

磁粉探伤法 Magic particle inspection

磁化率 Magic Susceptibility (Xm)

磁矩 magic moment

磁力 Magic

磁力 Magic Force

磁偶极子 Dipole

磁性 Magisum

磁性变态 Magic Transformation

磁性变态点 Magic Transformation

磁性感应 Magic Induction

粗珠光体 Coarse pearlite

淬火 Quenching

淬火及回火状态 Hardened & Tempered Strip/ Precision – Quenched Steel Strip

淬火剂 Quenching Media

单相金属 Single Phase Metal

单相轧压镀锡薄铁片(白铁皮/马口铁) Single-Reduced Tinplate

弹簧不锈钢线,线径及拉力列表 Stainless Spring Steel, Wire diameter and Tensile strength of Spring Wire

弹簧用碳钢片 CarbonSteel Strip For Spring Use

弹簧用碳钢片材之边缘处理 Edge Finished

弹性限度、阳氏弹性系数及屈服点 elastic limit, Yeung's module of elasticity to yield point

倒后擦发条 Pull Back Power Spring

导热度 Heat conductivity

低碳钢或铁基层金属 Iron & Low Carbon as Base Metal

低碳马氏体不锈钢 Low Carbon Martensite Stainless Steel

低温脆性 Cold brittleness

低温退火 Low Temperature Annealing

第二潜变期 Secondary Creep

第三潜变期 Tertiary Creep

第壹潜变期 Primary Creep

点焊 Spot welding

电镀金属钢片 Plate Metal Strip

电镀金属捆片的优点 Advantage of Using Plate Metal Strip

电镀锌(电解)钢片 Electro-galvanized Steel Sheet

电镀锌钢片的焊接 Welding of Electro-galvanized steel sheet

电镀锌钢片或电解钢片 Electro-galvanized Steel Sheet/Electrolytic Zinc Coated Steel Sheet

电解/电镀锌大大增强钢片的防锈能力 Galvanic Action improving Weather & Corrosion Resistance of the Base Steel Sheet

电解冷轧钢片厚度公差 Thickness Tolerance of Electrolytic Cold-rolled sheet

电炉 Electric furnace

电器及家电外壳用镀层冷辘 [低碳] 钢片 Coated (Low Carbon) Steel Sheets for Casing,Electricals & Home Appliances

电器用的硅 [硅] 钢片之分类 Classification of Silicon Steel Sheet for Electrical Use

电器用钢片的绝缘涂层 Performance of Surface Insulation of Electrical Steel Sheets

电器用钢片用家需自行应力退火原因 Annealing of the Electrical Steel Sheet

电器用硅 [硅] 钢片 Electrical Steel Sheet

电阻焊 Resistance Welding

定型发条 Constant Torque Spring

定型发条的形状及翻动过程 Shape and Spring Back of Constant Torque Spring

定型发条及上炼发条的驱动力 Spring Force of Constant Torque Spring and Wing-up Spring

定型发条驱动力公式及代号 The Formula and Symbol of Constant Torque Spring

镀层质量标记 Markings & Designations of Differential Coatings

镀铬 Chrome Plated

镀黄铜 Brass Plated

镀铝(硅)钢片 – 美材试标准(ASTM A-463-77)35.7 JIS G3314镀热浸铝片的机械性能 Mechanical Properties of JIS G 3314 Hot-Dip Aluminum-coated Sheets and Coils

镀铝(硅)钢片 – 日工标准(JIS G3314) Hot-aluminum-coated sheets and coils to JIS G 3314

镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较 parsion of various resistance of aluminized steel & other kinds of steel

镀铝(硅)钢片生产流程 Aluminum Steel Sheet, Production Flow Chart

镀铝硅钢片 Aluminized Silicon Alloy Steel Sheet

镀铝硅合金钢片的特色 Feature of Aluminized Silicon Alloy Steel Sheet

镀镍 Nickel Plated

镀锡薄钢片(白铁皮/马日铁)制造过程 Production Process of Electrolytic Tinplate

镀锡薄铁片(白铁皮/马口铁) (日工标准 JIS G3303)

镀锡薄铁片的构造 Construction of Electrolytic Tinplate

锻造 Fogging

断面缩率 Reduction of area

发条的分类及材料 Power Spring Strip Classification and Materials

发条片 Power Spring Strip

反铁磁体 Antiferromagism

方线公差 Square Wire Tolerance

防止生锈 Rust Protection

放射线探伤法 Radiographic inspection

非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数 Lamination Factors of Electrical, Magic & Mechanical Non-Grain Oriented Electrical

沸腾钢(未净钢) Rimmed steel

分类 Classification

负磁力效应 Negative effect

钢板 Steel Plate

钢板订货需知 Ordering of Steel Plate

钢板生产流程 Production Flow Chart

钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准 Type of steel Plate & Related JIS, ASTM and Other Major Industrial Standards

钢材的熔铸、锻造、挤压及延轧 The Casting, Fogging, Extrusion, Rolling & Steel

钢的脆性 Brittleness of Steel

钢的种类 Type of Steel

钢铁的名称 Name of steel

钢铁的制造 Manufacturing of Steel

钢铁的主要成份 The major element of steel

钢铁生产流程 Steel Production Flow Chart

钢铁用“碳”之含量来分类 Classification of Steel according to Carbon contents

高锰钢铸 – 日工标准 High manganese steel to JIS standard

高碳钢化学成份及用途 High Carbon Tool Steel, Chemical position and Usage

高碳钢片 High Carbon Steel Strip

高碳钢片用途 End Usage of High Carbon Steel Strip

高碳钢线枝 High Carbon Steel Wire Rod (to JIS G3506)

高温回火 High Temperature Tempering

格子常数 Lattice constant

铬钢 – 日工标准 JIS G4104 Chrome steel to JIS G4104

铬镍不锈钢及抗热钢弹簧线材–美国材验学会 ASTM A313 – 1987 Chromium – Nickel Stainless and Heat-resisting Steel Spring Wire – ASTM A313 – 1987

铬系耐热钢 Chrome Heat Resistance Steel

铬钼钢钢材 – 日工标准 G4105 62 Chrome Molybdenum steel to JIS G4105

各种不锈钢线在不同处理拉力比较表 Tensile Strength of various kinds of Stainless Steel Wire under Different Finish

工业标准及规格 – 铁及非铁金属 Industrial Standard – Ferrous & Non – ferrous Metal

公差 Size Tolerance

共晶 Eutectic

共释变态 Eutectoid Transformation

固熔体 Solid solution

光辉退火 Bright Annealing

光线(低碳钢线),火线(退火低碳钢线),铅水线 (镀锌低碳钢线)及制造钉用低碳钢线之代号、公差及备注 Ordinary Low Carbon Steel Wire, Annealed Low Carbon Steel Wire, Galvanized low Carbon Steel Wire & Low Carbon Steel Wire for nail manufacturing - classification, Symbol of Grade, Tolerance and Remarks.

硅含量对电器用的低碳钢片的好处 The Advantage of Using Silicon low Carbon Steel

滚焊 Seam welding

过共晶体 Hyper-ectectic Alloy

过共释钢 Hype-eutectoid

含硫易车钢 Sulphuric Free Cutting Steel

含铅易车钢 Leaded Free Cutting Steel

含铁体不锈钢 Ferrite Stainless Steel

焊接 Welding

焊接合金 Soldering and Brazing Alloy

焊接能力 Weldability 镀铝钢片的焊接状态(比较冷辘钢片) Tips on welding of Aluminized sheet in parasion with cold rolled steel strip

合金平衡状态 Thermal Equilibrium

厚度及阔度公差 Tolerance on Thickness & Width

滑动面 Slip Plan

化学成份 Chemical position

化学结合 Chemical bond

化学性能 Chemical Properties

化学元素 Chemical element

黄铜基层金属 Brass as Base Metal

回复柔软 Crystal Recovery

回火脆性 Temper brittleness

回火有低温回火及高温回火 Low & High Temperature Tempering

回火状态 Annealed Strip

基层金属 Base Metal of Plated Metal Strip

机械性能 Mechanical Properites

机械性能 Mechanical properties

畸变 Distortion

级别、电镀方法、镀层质量及常用称号 Grade, Plating type, Designation of Coating Mass & mon Coating Mass

级别,代号,扭曲特性及可用之线材直径 Classes, symbols, twisting characteristic and applied Wire Diameters

级别,代号及化学成份 Classification, Symbol of Grade and Chemical position

挤压 Extrusion

加工方法 Manufacturing Method

加工性能 Machinability

简介 General

交换能量 Positive energy exchange

矫顽磁力 Coercive Force

金属变态 Transformation

金属材料的试验方法 The Method of Metal inspection

金属材料的性能及试验 Properties & testing of metal

金属的特性 Features of Metal

金属的相融、相融温度、晶体反应及合金在共晶合金、固熔孻共晶合金及偏晶反应的比较 Equilibrium parision

金属间化物 Intermetallic pound

金属结晶格子 Metal space lattice

金属捆片电镀层 Plated Layer of Plated Metal Strip

金属塑性 Plastic Deformation

金属特性 Special metallic features

金属与合金 Metal and Alloy

金相及相律 Metal Phase and Phase Rule

晶粒取向(Grain-Oriented)及非晶粒取向(Non-Oriented)

晶粒取向,定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准) Magic Properties and Lamination Factor of SI-ORIENT-CORE& SI-ORIENT-CORE-HI B Electrical Steel Strip (JIS and AISI Standard)

晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(

LS)定取向 钢片之磁力及电力性能 Magic and Electrical Properties of SI-ORIENT-CORE-HI-B-LS

晶粒取向电器用硅 [硅] 钢片 – 高硼(HI-B)定取向芯钢片及定取向芯钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B and SI-ORIENT-CORE Grain Orient Electrical Steel Sheets

晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(LS) 定取向钢片之机械性能及夹层系数 Mechanical Properties and Lamination Factors of SI-ORIENT-CORE-HI-B-LS

晶粒取向电器用硅(硅)钢片 – 高硼(HI-B)定取向 芯钢片,定取向芯钢片及高硼低硫(LS)定取向芯钢片之标准尺寸及包装 Standard Forms and Size of SI-ORIENT-CORE-HI-B,SI-CORE, & SI-ORIENT-CORE-HI-B-LS Grain-

晶粒取向电器用硅(硅) 钢片-高硼(HI-B)定取向 芯钢片,定取向芯钢片及高硼低硫(LS)定取向芯钢片之厚度及阔度公差 Physical Tolerance of SI-ORIENT-CORE-HI-B, SI-ORIENT-CORE, & SI-CORE-HI-B-LS Grain

晶粒取向电器用硅钢片 Grain-Oriented Electrical Steel

晶粒取向电器用硅钢片主要工业标准 International Standard – Grain-Oriented Electrical Steel Silicon Steel Sheet for Electrical Use

晶体结构 Crystal Pattern

晶体结构,定向格子及单位晶格 Crystal structure, Space lattice & Unit cell

净磁矩 magic moment

绝缘表面 Surface Insulation

均热炉 Soaking pit

抗磁体 Diamagism

抗腐蚀及耐用 Corrosion & resistance durability

抗化学品能力 Chemical Resistance

抗敏感及环境保护 Allergic, re-cycling & environmental protection

抗热超级合金 Heat Resistance Super Alloy

扩散退火 Diffusion Annealing

拉尺发条 Measure Tape

拉伸测试(顺纹测试) Elongation test

冷冲及冷锻用碳钢线枝 Carbon Steel Wire Rods for Cold Heading & Cold Fing (to JIS G3507)

冷拉钢板重量表 Cold Drawn Steel Bar Weight Table

冷拉钢枝材 Cold Drawn Carbon Steel Shafting Bar

冷拉高碳钢线 Hard Drawn High Carbon Steel Wire

冷轧钢片 Cold-Rolled Steel Sheet/Strip

冷轧高碳钢–日本工业标准 Cold-Rolled (Special Steel) Carbon Steel Strip to JIS G3311

冷轧或热轧钢片阔度公差 Width Tolerance of Cold or Hot-rolled sheet

冷轧状态 Cold Rolled Strip

冷辘(低碳)钢片的分类用、途、工业标准、品质、加热状态及硬度表 End usages, industrial standard, quality, condition and hardness of cold rolled steel strip

冷辘低碳钢片(双单光片)(日工标准 JIS G3141) 73 - 95 Cold Rolled (Low carbon) Steel Strip (to JIS G 3141)

冷辘钢捆片及张片的电镀和印刷方法 Cold rolled steel coil & sheet electro-plating & painting method

冷辘钢捆片及张片制作流程图表 Production flow chart cold rolled steel coil sheet

冷辘钢片(拉力: 30-32公斤/平方米)在没有表面处理状态下的焊接状况 Spot welding conditions for bared (free from paint, oxides etc) Cold rolled mild steel sheets(T/S:30-32 Kgf/ μ m2)

冷辘钢片储存与处理提示 General advice on handling & storage of cold rolled steel coil & sheet

冷辘钢片的“理论重量”计算方程式 Cold Rolled Steel Sheet – Theoretical mass

冷辘钢片订货需知 Ordering of cold rolled steel strip/sheet

理论质量 Theoretical Mass

连续铸造法 Continuous casting process

两面不均等锡层 Both Side Different Thickness Coated Mass

两面均等锡层 Both Side Equally Coated Mass

裂纹之容许深度及脱碳层 Permissible depth of flaw and decarburized layer

临界温度 Critical temperture

马氏体不锈钢 Martensite Stainless Steel

马氏铁体淬火 Marquenching

埋弧焊 Submerged-arc Welding

每公斤发条的长度简易公式 The Length of 1 Kg of Spring Steel Strip

美材试标准的冷辘低碳钢片 Cold Rolled Steel Strip American Standard – American Society for testing and materials (ASTM)

美国工业标准 – 不锈钢及防热钢材的化学成份 (先数字后字母排列) AISI – Chemical position of Stainless Steel & Heat-Resistant Steel(in order of number & alphabet)

米勒指数 Mill's Index

魔术手环 Magic Tape

魔术手环尺寸图Drawing of Magic Tap

耐热不锈钢 Heat-Resistance Stainless Steel

耐热不锈钢比重表 Specific Grity of Heat – resistance steel plates and sheets stainless steel

镍铬 – 日工标准 G4102 63 Chrome Nickel steel to JIS G4102

镍铬耐热钢 Ni - Cr Heat Resistance Steel

镍铬系不锈钢 Nickel Chrome Stainless Steel

镍铬系耐热不锈钢特性、化学成份、及操作温度 Heat-Resistance Stainless Steel

镍铬钼钢 – 日工标准 G4103 64 Nickel, Chrome & Molybdenum Steel to JIS G4103

疲劳测试 Fatigue Test

片及板材 Chapter Four-Strip, Steel & Plate

平坦度(阔度大于500公厘,标准回火) Flatness (width>500mm, temper: standard)

破坏的检验 Destructive Inspection

其它焊接材料请参阅日工标准目录 Other Soldering Material

其它日工标准冷轧钢片(用途及编号) JIS standard & application of other cold Rolled Special Steel

气焊 Gas Welding

潜变测试 Creep Test

潜变强度 Creeps Strength

强度 Strength

琴线(日本标准 G3522) Piano Wires ( to G3522)

球化退火 Spheroidizing Annealing

曲面(假曲率) Camber

屈服强度(降伏强度) (Yield strangth)

全静钢 Killed steel

热力应先从工件边缘透入 Heat from the Laminated Stacks Edges

热膨胀系数 Coefficient of thermal expansion

热轧钢片 Hot-Rolled Sheet/Strip

热轧钢片厚度公差 Thickness Tolerance of Hot-rolled sheet

日本工业标准–不锈钢的化学成份(先数字后字母排列) JIS – Chemical position of Stainless Steel (in order of number & alphabet)

日工标准(JIS G3141)冷辘钢片化学成份 Chemical position – cold rolled steel sheet to JIS G3141

日工标准(JIS G3141)冷辘钢片重量列表 Mass of Cold-Rolled Steel Sheet to JIS G3141

日工标准JIS G3141冷辘低碳钢片(双单光片)的编号浅释 Decoding of cold rolled(Low carbon)steel strip JIS G3141

日工标准下的特殊钢材 Specail Steel according to JIS Standard

熔铸 Casting

软磁 Soft Magic

软磁材料 Soft Magic Material

软焊 Soldering Alloy

软焊合金 – 日本标准 JIS H 4341 Soldering Alloy to JIS H 4341

上链发条 Wind-up Spring

上漆能力 Paint Adhesion

伸长度 Elongation

渗碳体 Cementitle

渗透探伤法 Perate inspection

生产流程 Production Flow Chart

生锈速度表 Speed of rusting

时间淬火 Time Quenching

时间效应(老化)及拉伸应变 Aging & Stretcher Strains

释出硬化不锈钢 Precipitation Hardening Stainless Steel

双相辗压镀锡薄钢片(马口铁/白铁皮) Dual-Reduction Tinplate

顺磁体 Paramagic

碳钢回火 Tempering

碳污染 Prevent Carbon Contamination

特点 Characteristic

特殊钢 Special Steel

特殊钢以用途来分类 Classification of Special Steel according to End Usage

特殊钢以原素分类 Classification of Special Steel according to Element

提防过份氧化 No Excessive Oxidation

铁磁体 Ferromagism

铁铬系不锈钢片 Chrome Stainless Steel

铁及非铁金属 Ferrous & Non Ferrous Metal

铁锰铝不锈钢 Fe / Mn / Al / Stainless Steel

铁线(低碳钢线)日工标准 JIS G 3532 Low Carbon Steel Wires ( Iron Wire ) to JIS G 3532

铁相 Steel Phases

同素变态 Allotropic Transformation

铜基层金属 Copper as Base Metal

透磁度 Magic Permeability

退火 Annealing

退火时注意事项 Annealing Precautionary

外价电子 Outer valence electrons

弯度 Camber

完全退火 Full Annealing

物理性能 Physical Properties

物料科学 Material Science

物料科学定义 Material Science Definition

锡层质量 Mass of Tin Coating (JIS G3303-1987)

锡基、铅基及锌基轴承合金比较表 parison of Tin base, Lead base and Zinc base alloy for Bearing purpose

细线材、枝材、棒材 Chapter Five Wire, Rod & Bar

显微观察法 Microscopic inspection

线材/枝材材质分类及制成品 Classification and End Products of Wire/Rod

线径、公差及机械性能(日本工业标准 G 3521) Mechanical Properties (JIS G 3521)

相反旋转 Opposite span

相律 Phase Rule

锌包层之重量,铜硫酸盐试验之酸洗次数及测试用卷筒直径 Weight of Zinc-Coating, Number of Dippings in Cupric Sulphate Test and Diameters of Mandrel Used for Coiling Test

锌镀层质量 Zinc Coating Mass

锌镀层质量(两个不同锌镀层厚度) Mass Calculation of coating (For differential coating)/MM

锌镀层质量(两个相同锌镀层厚度) Mass Calculation of coating (For equal coating)/MM

亚共晶体 Hypoeutetic Alloy

亚铁磁体 Ferrimagism

亚铁释体 Hyppo-Eutectoid

延轧 Rolling

颜色 Colour

易车(快削)不锈钢 Free Cutting Stainless Steel

易车(快削)不锈钢拉力表 Tensile Strength of Free Cutting Wires

易车(快削)不锈钢种类 Type of steel

易车不锈钢及易车钢之不同尺寸及硬度比较 Hardness of Different Types & Size of Free Cutting Steel

易车碳钢 Free Cutting Carbon Steels (to JIS G4804 )

易溶合金 Fusible Alloy

应力退火温度 Stress –relieving Annealing Temperature

应用材料 Material Used

硬磁 Hard Magic

硬磁材料 Hard Magic Material

硬度 Hardness

硬度及拉力 Hardness & Tensile strength test

硬焊 Brazing Alloy

硬化 Work Hardening

硬化性能 Hardenability

用含碳量分类 – 即低碳钢、中碳钢及高碳钢 Classification According to Carbon Contains

用途 End Usages

用组织结构分类 Classification According to Grain Structure

幼珠光体 Fine pearlite

元素的原子序数 Atom of Elements

原子的组成、大小、体积和单位图表 The size, mass, charge of an atom, and is particles (Pronton,Nentron and Electron)

原子的组织图 Atom Constitutes

原子及固体物质 Atom and solid material

原子键结 Atom Bonding

圆钢枝,方钢枝及六角钢枝之形状及尺寸之公差 Tolerance on Shape and Dimensions for Round Steel Bar, Square Steel Bar, Hexagonal Steel Bar

圆径及偏圆度之公差 Tolerance of Wire Diameters & Ovality

圆面(“卜竹”)发条 Convex Spring Strip

再结晶 Recrystallization

正磁化率 Positive magic susceptibility

枝/棒无芯磨公差表 (μ) (μ = 1/100 mm) Rod/Bar Centreless Grind Tolerance

枝材之美工标准,日工标准,用途及化学成份 AISI, JIS End Usage and Chemical position of Cold Drawn Carbon Steel Shafting Bar

直径,公差及拉力强度 Diameter, Tolerance and Tensile Strength

直径公差,偏圆度及脱碳层的平均深度 Diameter Tolerance, Ovality and Average Decarburized Layer Depth

置换型固熔体 Substitutional type solid solution

滞后回线 Narrow Hystersis

中途退火 Process Annealing

中珠光体 Medium pearlite

周期表 Periodic Table

轴承合金 Bearing Alloy

轴承合金–日工标准 JIS H 5401 Bearing Alloy to JIS H 5401

珠光体 Pearlite

珠光体及共释钢 Pearlite &Eutectoid

主要金属元素之物理性质 Physical properties of major Metal Elements

转变元素 Transition element

自发上磁 Spontaneous magization

自由度 Degree of freedom

能量积 Maximum Energy Product

(to JIS G3521, ISO-84580-1&2)化学成份分析表 Chemical Analysis of Wire Rod

305, 316, 321及347之拉力表 Tensile Strength Requirements for Types 305, 316, 321 and 347

A1S1-302 贰级线材之拉力表 Tensile Strength of A1S1-302 Wire

Grain Oriented & Non-Oriented 电器用硅 [硅] 钢片的最终用途及规格 End Usage and Designations of Electrical Steel Strip

Oriented Electrical Steel Sheets

SK-5 & AISI-301 每公尺长的重量/公斤(阔2.0-10公厘) Weight per one meter long (kg) (Width 2.0-10mm)

SK-5 & AISI-301 每公斤长的重量/公斤(阔100-200公厘) Weight per one meter long (kg) (Width 100-200mm)

SK-5 & AISI-301 每公斤之长度(阔100-200公厘) Length per one kg (Width 100-200mm)

SK-5 & AISI-301 每公斤之长度(阔2.0-10公厘) Length per one kg (Width 2.0-10mm)

以下为关联文档:

托福写作冷门词汇解决的最好方法就是要善于联想到一些具体的事实、具体的例证以及具体的现象。比如说,要谈论电视节目这一话题,可以联想到新闻联播,并由此想到它让人们开阔视野,了解世界,但有人觉...

打好词汇语法基础,听力不是问题打好词汇语法基础,听力不是问题一、要注意语音的锻炼听力的考试归根到底其实就是辨音的过程,也就是学着分辨每一个发音者的每一个音的过程。但是有相当多的考生在词汇量上已...

实例讲解托福写作避免使用初期词汇涉及托福的时候,能够有着清晰的逻辑固然很重要,但是词汇对于整篇内容的准确表达也有着至关重要的作用。如果在文章中用惯普通的初级词汇,那文章就显得过于暗淡。如何避免初级词...

精泛结合,学习英语词汇精泛结合,学习英语词汇例如,在学到guarantee一词时,除了要记忆它的发音、拼写、汉语释义及词类外,还要学习怎样来运用这个词:(1)sth. guarantees sth. elsee. g. This method...

雅思听力高分要诀语感与词汇量成关键雅思听力高分要诀:语感与词汇量没有一定量的句型,在和英美人交流的时候就会在表达上形成差距,造成交流障碍。所以词汇是步,同时要扩大对句型的掌握,背词汇的同时要大量记忆常用...

雅思听力租房常用词汇雅思听力租房常用词汇pets not allowed 不许养宠物take property insurance 买财产保险blackout 停电emergency/fire gate 紧急出口lift/elevator 升降梯attic 阁楼t...

如何搭配好托福写作词汇托福写作:泰坦尼克号经典对白 经典电影在让我们大饱眼福的同时也为我们提供了难得的写作素材,下面我们就一起来看一下《泰坦尼克》电影中,值得借鉴的句子。 1、All life is a g...

托福写作中常用错的5组词汇Should governments spend more money on improving roads and highways, or should governments spend more money on improving public transportation (buses, trains, s...

贺白痴、残废等词汇的彻底被抛弃看了这个消息,一股文明的新意扑面而来。也许有人会说,“偶尔无心的伤害,全都为了爱”。为了描述残疾状态,用几个词算不了什么啊,又不是故意的。但文明应该随着时代而进步。早在19...

推荐阅读
图文推荐